China Smr Shaft Mounted Gearbox best automatic gearbox

Product Description

SMR Reducer Specification
 
 
Output Hub

Standard or alternative hubs with metric bores are available to suit international standard shaft diameters.

2 Precision High Quality Gearin

Computer Designed Helical Gears, Strong Alloy  Materials  for  High  Load  Capacity, Case  Carburized  for  long  life,  Ground Profile(some intermediate pinions are shaved) Crown tooth Profile, In Conformance  with  ISO  13281997,  98% Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.

Maximum Capacity Housing Design
 
Close  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Features, Precision Bored and Dowelled to Ensure Accurate In-Line Assembly.

4 Strong Alloy Steel Shafts

Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions, for
Maximum Load and Maximum Torsional Loads. Generous Size Shaft
Keys for Shock Loading and Conform to ISO Standards.

5 Additional Case Lugs Except H and Gear Case

Eliminates the Need for Critical Tightening of Torque Arm Bolts. Controls Position of
Standard Torque Arm Mounting within Recommended limits.

6 BackStops

Alternative Parts, Antirun Back Device, AreAvailable on all 13:1 and 20:1 Ratio Units and do not recommend for 5:1 Units.

7 Bearings and Oilseals

Bearings are Adequately Proportioned and Conform to ISO Dimension Plan, Readily
Available WorldWide. Oilseals are Double Lipped Garter Spring Type, Ensuring Effective Oil Sealing.

8 Rubberised End Caps

Self Sealing Intermediate Cover Plates, to Standard ISO Housing Dimensions.

Torque Arm Assembly

For Easy Adjustment of the Belt.

Size : SMR B C D E F G H 

RATIO : 5:1  13:1  20:1 

Make contact with Me

Welcome to speak to William for much more details!

 

Product B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) ten-115 ten-one hundred ten 10-110 ten-105 ten-a hundred and five 10-one hundred 10-a hundred ten-a hundred
Power Ranking(KW) .29-3.11 .forty nine-4.sixty two .82-7.81 1.25-11.fifty five 1.ninety seven-seventeen.01 three.11-27.09 four.9-forty.seven 7.8-sixty.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449

 

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) a hundred-four hundred a hundred-400 one hundred-four hundred one hundred-four hundred one hundred-400 100-four hundred one hundred-400 100-four hundred
Energy Ranking(KW) two.sixty eight-7.14 four.2-9.66 six.62-15.sixty five ten.29-24.57 fifteen.twelve-35.ninety one 25.2-fifty nine.9 36.2-81.nine 62.2-134.two
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940

 

 

Dimension(mm) SMR Dimensions
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Regular measurement of shaft thirty forty fifty fifty five 65 seventy five 85 100
Different measurement of shaft 40 50 55 65 seventy five 85 a hundred a hundred and twenty
Enter shaft keyway 6×3.5×50 6×3.5×59 8x4x63 8x4x70 10x5x70 12x5x90 14×5.5×100 16x6x100

 

 

Business Profile

l  The biggest maker and exporter of worm gear reducers in Asia.

 

l  Established in 1976, we transformed from a county owned manufacturing unit to private 1 in 1996. HangZhou SINO-DEUTSCH Electrical power TRANSMISSION Gear CO.,LTD is our new identify given that 2001.

 

l  We are the initial producer of reducers and gearboxes in China who was offered export license given that calendar year 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the very first proprietor of CHINA Leading Brand name and Most Well-known Trade Mark for reducers.
 

    Initial to achieve ISO9001 and CE Certification amongst all producers of gearboxes in China.

   

 

 

As a professional company of worm gearbox and worm gear reducers in China, we largely produce reduction gearbox,aluminum scenario worm gearboxes,arc equipment cylindrical worm gearboxes, worm gear reducers, in line helical gearboxes, and cyclo travel reducers, and so on. These goods feature rational framework, steady functionality, and dependable top quality, and so on. They are broadly utilized in energy, mining, metallurgy, constructing substance, chemical, meals, printing, ceramic, paper-making, tobacco, and other industries.

 

 

We have 600 employees in our manufacturing unit, which covers 70,000 square meters in HangZhou. We have been producing 2,five hundred units of reducers everyday considering that 2012. We are proudly exporting 70% of our items to far more than forty international locations all in excess of the term. Our clients come from Italy, Germany, United states of america, Canada, Spain, United kingdom, Mexico, Brazil, Argentina, Turkey, Singapore and other major industrial nations around the world in the world. thirty% of them are OEM made for immediate companies of other items. 

 

 

We warmly welcome consumers from other areas of the planet to check out us. Viewing is believing. We are quite assured that soon after checking out our facility, you will have confidence on our products. We have the latest automated equipments and knowledgeable personnel to make certain the steady good quality and massive output. We have the most refined technological and engineering crew to help most demanding requirement on standard and OEM products.

 

Hunting ahead to assembly you in HangZhou, China.

US $98
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industry
Hardness: Hardened
Jsize: B C D E F G H J
Manipulate Way: Robotics
Changes Way: Mixed
Transport Package: Standard Export Packing and Wood Pallets Packing

###

Customization:

###

Model B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) 10-115 10-110 10-110 10-105 10-105 10-100 10-100 10-100
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449

###

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940

###

Dimension(mm) SMR Size
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Standard size of shaft 30 40 50 55 65 75 85 100
Alternative size of shaft 40 50 55 65 75 85 100 120
Input shaft keyway 6×3.5×50 6×3.5×59 8x4x63 8x4x70 10x5x70 12x5x90 14×5.5×100 16x6x100
US $98
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industry
Hardness: Hardened
Jsize: B C D E F G H J
Manipulate Way: Robotics
Changes Way: Mixed
Transport Package: Standard Export Packing and Wood Pallets Packing

###

Customization:

###

Model B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) 10-115 10-110 10-110 10-105 10-105 10-100 10-100 10-100
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449

###

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940

###

Dimension(mm) SMR Size
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Standard size of shaft 30 40 50 55 65 75 85 100
Alternative size of shaft 40 50 55 65 75 85 100 120
Input shaft keyway 6×3.5×50 6×3.5×59 8x4x63 8x4x70 10x5x70 12x5x90 14×5.5×100 16x6x100

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China Smr Shaft Mounted Gearbox     best automatic gearbox	China Smr Shaft Mounted Gearbox     best automatic gearbox
editor by czh 2022-11-26